Alpine CDE-153BT User Manual

-EN

Checking the SiriusXM Radio ID Number

To subscribe to the SiriusXM Satellite Radio service, it is necessary to
locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID
contains 8 characters and can be found on the bottom of your SiriusXM
Tuner or can be displayed on when selecting Channel 0 by following the
steps below:

While in the Satellite Radio Mode, press

 or  to

select channel “0”.

The unit displays “RADIO ID” and ID number alternately.

Note

• The Radio ID does not include the letters I, O, S or F.

To cancel the ID number display, select a channel other
than “0”.

Storing Channel Presets

Press BAND to select the desired band you want to store
the preset in.

There are 3 Satellite Radio Preset bands.
Each press of BAND changes the band: SXM1  SXM2  SXM3
 SXM1

Tune to the desired channel, and then press and hold (for
at least 2 seconds) one of the preset buttons (1 through 6)
to store the channel.

The display then shows the stored Band and preset number (for
example, SXM1-3 is shown when preset 3 of BAND1 is selected).

Repeat the procedure to store up to 5 other channels onto
the same band.

Notes

• A total of 18 channels can be stored in the preset memory, 6 Channels

for each band (SXM1, SXM2 and SXM3).

• If you store a new channel into a preset which already has a channel

assigned, the current channel will be cleared and replaced with the new
one.

Tuning Channels using Presets

Press BAND to select the desired band of Presets you wish
to access.

Press the preset buttons (1 through 6) that has your
desired Satellite Radio channel stored in memory.

Tune Start Function

Use TUNE START to play music content from its beginning on
programmed preset stations. The user can, therefore, enjoy the full track
(i.e. song) rather than hearing what's left from its current live playback
position. TUNE START can be turned OFF. For details, refer to “Setting
Tune Start” on page 37.

Note

• Preset stations that play other than music-type content will start playing

the channel from the current live play point when selected.

Tune Scan Function

While listening to SiriusXM Satellite Radio, you can scan through all the
songs you missed from your current band of preset channels.

Press and hold

/ENTER/OPTION for at least 2 seconds

when you want to scan the preset music.

The Option mode is activated.

Turn the Rotary encoder to select TUNE SCAN, and then
press

/ENTER.

The “

” indicator lights up during TUNE SCAN mode.

Press

/ENTER during scan playback, tune scan mode will be

canceled and the selected track will be played back normally, at
the same time the “

” indicator disappears.

Press

r during scan playback to cancel Tune Scan mode. The

tuner returns to the channel before Tune Scan was initiated and
“SCAN STOP” will be displayed.

Notes

• This function is available when SiriusXM SXV200 Vehicle Tuner is

connected.

• If no operation is performed during the scanning process, when

scanning finishes, the next mode depends on the SiriusXM Tuner.

• During Tune Scan mode, the artist and song name will be displayed.
• The SiriusXM Tune scans through the songs from the preset music

channels on the current band only, scanning from oldest to newest.

Storing the desired Artist and Song Alerts

While listening to SiriusXM Satellite Radio, you can be alerted when
your favorite songs or artists are playing on other channels. An
interruption ALERT will be displayed when a matching artist or song is
found on another channel. For receiving interruption ALERT
information, refer to “Receiving and Tuning to an Alert” on page 39.

Press and hold

ENTER/OPTION for at least 2 seconds

when a Song or the song of an Artist you want to store is
playing.

The Option mode is activated.

Turn the Rotary encoder to select ALERT MEMO, and then
press

ENTER.

Turn the Rotary encoder to choose SAVE ART? or SAVE
SNG? (when available), and then press

ENTER.

Note

• If the artist name or song title is not available to save, NO ARTIST or

NO SONG will be displayed.

The new alert was stored in memory.

An “ART/SONG SAVED” pop-up screen is followed by an “XX
U(sed)/YY E(mpty)”.
XX is the total number of song titles or artist names stored in
memory, and YY is the total number of memory locations still
available for storage.

Notes

• If you try to store when the memory is full, “MEM FULL” is displayed

followed by “REPLACE/CANCEL”. If you want to replace an existing
alert item, select “REPLACE” by turning Rotary encoder, and then
press ENTER, the existing alert list stored in memory is displayed.
Select one of the stored alerts using the Rotary encoder. To replace the
selected alert, press ENTER and “ART/SONG SAVED” and “X
U(sed)/ Y E(mpty)” are displayed.