Yamaha ysp-1600bl Owner's Manual

PREPARATIONS

➤ a Installation

En

❑

The unit achieves surround sound by reflecting sound beams off walls.

Effective surround effect may not be achieved in the following environment.

• Sound beams are blocked by obstacles such as furniture.

• The room size is not within the following dimensions;

Width: 3 meters to 7 meters (9.8 ft to 23 ft)

Depth: 3 meters to 7 meters (9.8 ft to 23 ft)

Height: 2 meters to 3.5 meters (6.6 ft to 11.5 ft)

• Listening position is too close to the unit.

• The unit is installed too close to the left or right wall.

• The unit is installed in the corner of the room.

• There is no wall for reflecting sound beam on the path of the sound beams.

• The optimum surround sound effect is achieved by setting a position according to the installation position of 

the unit. For details, refer to “Setting a surround sound effect for the installation position” (p. 19).

Raise the antenna on the rear panel of the unit when connecting a wireless router 
(access point) to use a network.

• Do not apply excessive force on the antenna. Doing so may damage it.

• Be sure to check the direction in which the antenna moves, and angle it in the proper direction.

• Do not remove the antenna.

• For details on the wireless connection, refer to p. 32.

Hold the base of the 
antenna while raising it 
to its upright position.