Yamaha ysp-1600bl Owner's Manual

APPENDIX

➤ Troubleshooting

En

The HDMI cable is not securely connected.

Connect the HDMI cable properly.

The HDMI IN jack on the TV, which is connected to the HDMI OUT (ARC) 
jack on the unit, is not compatible with HDCP 2.2.

Connect the unit to the HDMI IN jack that is compatible with HDCP 2.2 on a 
TV.

The input switch of TV is not set correctly.

Set the TV’s input source to this unit.

The unit may be placed close to digital equipment or high-frequency 
equipment.

Move the equipment away from the unit.

–

“HDMI Control” is set to “Off”.

Set “HDMI Control” to “On”.

The HDMI control function is disabled on your TV.

Refer to the manual supplied with your TV and check the setting.

–

The number of the connected HDMI devices exceeds the limit.

Disconnect some of the HDMI devices.

–

The TV does not support the audio delay auto adjustment feature.

Adjust timing of sound output manually from “Audio Delay”.

“Bluetooth” is set to “Off”.

Set it to “On”.

The device does not support A2DP.

Perform paring operations with a device which supports A2DP.

The unit and device are too far apart.

Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit 
and pair the device with this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in 
the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

Another Bluetooth device is connected.

Terminate current Bluetooth connection, and perform pairing with the new 
device.

Bluetooth is not selected as the input source.

Select Bluetooth as the input source.

A Bluetooth adaptor, etc. that you want to pair with the unit has a password 
other than “0000”.

Use a Bluetooth adaptor, etc. whose password is “0000”.

“Transmission” is set to “Off”.

Set it to “On”.