Gigaset SL100 RC-11065 User Manual

Gigaset SL100/SL150 colour / IM_en / A31008-M1572-R121-2-7619 / sms_neutral_Woody.fm / 

28.10.05

warded to the extension of the PABX (CLIP). 
The CLIP of the number of the SMS centre is evaluated in the Gigaset (telephone).
If your phone is connected to a PABX, you may have to prefix the number of the SMS 

centre with an access code (this depends on your PABX). You can store the access code 

in your base station (page 85). 
If in doubt, you can test your PABX by sending a text message to your own number and 

putting the access code before the number of the SMS centre. If you do not receive the 

message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension 

number. The recipient cannot reply to you directly in this case.
Text messages can only be sent and received through ISDN exchanges with the MSN 

number assigned to your base station. 

The following error codes are displayed: 

A message appears on the screen if your phone cannot receive any more text messages.
You cannot receive text messages under the following conditions:
◆ The CLIP service (Calling Line Identification Presentation) is not activated for your 

phone line,

◆ Call diversion is activated with When: All Calls ,
◆ Call diversion All Calls is activated for the network mailbox,
◆ The memory (incoming and draft message lists) is full.

E0

Calling Line Identification permanently withheld (CLIR).

Calling Line Identification is not enabled.

FE

Error occurred during message transfer.

FD

Connection to SMS centre failed.
Text messages cannot be sent or received if the number of an SMS cen-

tre is missing or incorrectly stored. Check that the number of the SMS 

centre has been correctly stored.