Pioneer AVH-X4700BS Owner's Manual
38
You can display the video image output by the device connected
to this product.
External video component and the display on page 56
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure (for AV
source)
source)
You can display the video image output by the device connected
to video input.
1 Display the “System” setting screen.
2 Touch [Input/Output Settings].
3 Touch [AV Input].
3 Touch [AV Input].
X5700BHS
X3700BHS
Set the setting to “Source”.
X4700BS
X2700BS
X1700S
Set the setting to “On”.
4 Display the “AV source selection” screen.
5 Touch [AV].
The image is displayed on the screen.
AV
48
21
Full
6/10
AUX
48
21
Full
6/10
Switches between the screen to
operate video files and that to
operate music files.
p
is only available when there are both audio and video
files on the auxiliary equipment.
p
A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
External video component and the display on page 56
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the “System” setting screen.
2 Touch [Input/Output Settings].
3 Confirm that “AUX Input” is turned on.
4 Display the “AV source selection” screen.
3 Confirm that “AUX Input” is turned on.
4 Display the “AV source selection” screen.
5 Touch [AUX].
The image is displayed on the screen.
Setting the video signal
When you connect this product to an AUX equipment, select the
suitable video signal setting.
p
p
You can operate this function only for the video signal input
into the AUX input.
1 Display the “Video Setup” screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item you want to set.
3 Touch [AUX].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.
Starting procedure (for camera)
X5700BHS
X3700BHS
You can display the image output by the camera connected to
video input.
1 Display the “System” setting screen.
2 Touch [Input/Output Settings].
3 Touch [AV Input] repeatedly, set to “Camera”.
4 Display the “AV source selection” screen.
3 Touch [AV Input] repeatedly, set to “Camera”.
4 Display the “AV source selection” screen.
5 Touch [AV].
The image is displayed on the screen.
AV
48
21
Full
6/10
Setting the video signal
When you connect this product to an AV equipment, select the
suitable video signal setting.
p
p
You can operate this function only for the video signal input
into the AV input.
1 Display the “Video Setup” screen.
< CRD4878-B >
< CRD4878-B >
AUX source
AV input
38