NIGHT OWL AHD7-441 User Manual
For more information on this product visit
www.NightOwlSP.com
54
CHAPTER 8: REMOTE ACCESS
Write these addresses down in the User Information
section at the end of the manual for future reference.
section at the end of the manual for future reference.
8.3.2. Mac
®
Operating Systems
Make sure that the DVR is properly connected to the router/modem.
Follow these steps to determine basic information about your network:
1. Select the
Airport icon on your computer screen and choose the
“Open Network Preferences” option.
2. Choose
2. Choose
Ethernet and select the Advanced button in the lower right
corner.
3. Select the
3. Select the
TCP/IP tab at the top to display your computer’s network
information.
4. Write down the “IPv4 address.“
5. Change the last three digits of the address to 150 and write this
address down as well e.g. 192.168.1.150. This will become the IP
address of your DVR at a later time.
4. Write down the “IPv4 address.“
5. Change the last three digits of the address to 150 and write this
address down as well e.g. 192.168.1.150. This will become the IP
address of your DVR at a later time.