Lorex LNC116 Owner's Manual

100

iPad App

3. Under Status LED, select one of the following:

• Normal: Status and network LED's will function as normal. For details on LED 

functions, see "Camera Overview" on page 1.

• Always turn off: Status and network LED's are turned off at all times.

• Turn off after network connected: Status and Network LED's turn on when the 

camera is powered on and turn off once a network connection is made.

NOTE: This does not affect the SD LED. Removing the microSD card will turn off the SD 
LED, but it will also disable microSD recording.

4. Tap Done to return to the Control menu.
5. Under Motion Sensitivity, select the motion detection sensitivity between 1 (High) 

and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be 
triggered if a moving object is larger than 1% of the video area. If it is set to 10, a 
moving object must be larger than 10% of the video area to trigger motion detection. 
Tap Control to return to the Control menu.

NOTE: This setting does not affect the PIR motion detector.

6. Tap Update to save your settings.

Configure when the camera uses day or night mode. When day mode is on, the camera 
sees in color. When night mode is on, the camera sees in black and white, and the 
Infrared LED turns on to enable night vision.

1. In Camera List, tap 

 next to the camera you would like to edit.

Set video motion detection 
sensitivity