Lorex LNC116 Owner's Manual

119

Android App

English

• Time Display on Video: Tap to select ON to enable time stamps on video or OFF to 

disable time stamps.

• Video flip: Tap to select Video Flip to flip the camera image vertically and horizontally 

or select Normal for the normal orientation. This is useful if the camera has been 
mounted to a wall or ceiling upside down.

4. Tap Video Settings when finished making changes, then tap Update to save your 

settings.

Configure the behavior of the camera status and network LED’s. This is useful if you want 
the camera to be harder to spot at night. You can also configure the sensitivity for video 
motion detection.

1. In Camera List, tap 

 next to the camera you would like to edit.

2. Tap Video Settings. Then tap Control.

3. Under Status LED, select one of the following:

• Normal: Status and network LED’s will function as normal. For details on LED 

• Always turn off: Status and network LED’s are turned off at all times.

• Turn off after network connected: Status and Network LED’s turn on when the 

camera is powered on and turn off once a network connection is made.

NOTE: This does not affect the SD LED. Removing the microSD card will turn off the SD 
LED, but it will also disable microSD recording.

4. Under Motion Sensitivity, select the motion detection sensitivity between 1 (High) 

and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be 

Select Network and Status LED behavior

Select Video motion detection sensitivity