Lorex LNC116 Owner's Manual

152

Configuring Camera Settings using a Web Browser

1. Under Web access port, enter the desired web access port. It must not be used by 

any other device on your network. Note that L-View will automatically update the web 
access port when connecting to Web Configure on the local network.

2. Click Save & Apply. Restart the camera by disconnecting and reconnecting the power 

adapter or pressing the Reboot button (see “Reboot” on page 155).

Configure the behavior of the camera power and network LED’s. This is useful if you want 
the camera to be harder to spot at night.

NOTE: This does not affect the SD LED. Removing the microSD card will turn off the SD 
LED, but it will also disable microSD recording.

To configure the status and network LED’s:
1. Select one of the following:

• Normal LED display: Status and network LED’s will function as normal. For details 

• Turn off LED display always: Status and network LED’s are turned off at all times.

• Turn off LED display after network connected: Status and Network LED’s turn on 

when the camera is powered on and turn off once a network connection is made.

2. Click Save & Apply to apply settings to the camera.