Lorex LNC116 Owner's Manual

23

Getting Started

English

6. Tap the name of your WiFi network, enter the password, and tap OK. Wait for the 

update to complete.

7. Remove the Ethernet cable from the camera. It will connect to the wireless network. 

When it is connected, the blue Network LED will be on or flashing.

8. Press 

 next to the camera name to exit the edit camera screen.

9. Tap the camera in the Camera List to connect. If you cannot connect, check to make 

sure you have entered the correct wireless password and that the camera is in signal 
range of your wireless router.

NOTE: The camera must be connected to your router using an Ethernet cable before you 
can set it up to use WiFi.

1. Connect to your camera using Lorex Ping. For details, see “Connecting to your 

Camera on Android” on page 15. Your phone or tablet must be connected to your 
WiFi, not your 3G/mobile network.

2. Tap 

 to open the edit camera screen.

Slide Wi-Fi to ON

Tap your WiFi 
network