Lorex LNC216 Owner's Manual
18.4.4
Configuring Temperature Push Notifications and Temperature Units
(Fahrenheit or Celsius)
Temperature Push Notifications can be set up to send you alerts if the temperature near
the camera goes higher or lower than the specified values. You can also select the temper-
ature unit that will be used by the system.
the camera goes higher or lower than the specified values. You can also select the temper-
ature unit that will be used by the system.
Note
The camera requires a temperature sensor in order to use this feature. LNC226X does not have a tem-
perature sensor.
The camera requires a temperature sensor in order to use this feature. LNC226X does not have a tem-
perature sensor.
To configure temperature push notifications:
1. In Camera List, tap
next to the camera.
2. Tap Alarm notification.
3
4
5
6
5
6
3. Under Temperature, select ON to enable temperature notifications.
4. Under Temperature unit, select F° or C°.
5. Under Higher bound, select the high temperature value. You will receive a notification
4. Under Temperature unit, select F° or C°.
5. Under Higher bound, select the high temperature value. You will receive a notification
if the temperature near the camera goes above this value.
6. Under Lower bound, select the low temperature value. You will receive a notification if
the temperature near the camera goes above this value.
7. Tap Update to save your settings.
18.4.5
Editing Camera Mobile Streaming Settings
Configure the camera image quality settings for streaming to mobile devices (i.e. smart-
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
To edit mobile streaming settings:
1. In Camera List, tap
next to the camera.
#LX400003; r. 2.0/14027/14265; en-US
95