Lorex LNC216 Owner's Manual
4. Tap Update to save your changes.
18.4.9
Editing Camera Wired Network Settings
Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
IP.
To edit camera wired network settings:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then Wired Network.
3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP ad-
dress from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.
18.4.10
Editing Camera WiFi Network Settings
Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then WiFi Network.
4. Slide WiFi to ON to enable WiFi on the camera and scan for available networks.
3. Tap Network then WiFi Network.
4. Slide WiFi to ON to enable WiFi on the camera and scan for available networks.
#LX400003; r. 2.0/14027/14265; en-US
100