Lorex LNC216 Owner's Manual
2. Tap Video Settings. Then tap Video.
1
2
3
4
5
6
7
8
3. Configure the following:
3.1.
Video color: Select Color to view the camera in color or select Black & white.
3.2.
Brightness: Manually adjust the brightness of the image between 10 (highest)
and 1 (lowest).
and 1 (lowest).
3.3.
Sharpness: Manually adjust the sharpness of the image between 10 (highest)
and 1 (lowest).
and 1 (lowest).
3.4.
Low Light Sensitivity: Set the camera’s sensitivity in low light environments
between Very High (highest), High, and Normal (lowest).
between Very High (highest), High, and Normal (lowest).
3.5.
Place: Select Outdoor video for well lit environments. Select Indoor Video if
you notice strip lines in the image or if the picture is too dark on the Outdoor vid-
eo setting. Select Indoor video + sunlight if the picture is too bright on the In-
door Video setting.
you notice strip lines in the image or if the picture is too dark on the Outdoor vid-
eo setting. Select Indoor video + sunlight if the picture is too bright on the In-
door Video setting.
If you select an indoor settings, select 60Hz light freq or 50Hz light freq to
adjust the camera for the frequency of your indoor lighting.
3.6.
Preference: Select whether you would like the camera to reduce the image
quality or the frame rate when bandwidth increases or decreases. Select Video
Motion to have the camera maintain the frame rate and reduce image quality
when bandwidth is insufficient. Select Image Quality to have the camera main-
tain image quality and reduce frame rate when bandwidth is insufficient. Select
Better Quality to have the camera maintain frame rate and increase quality
when bandwidth is sufficient. Select Best Quality to have the camera maintain
the frame rate and increase quality to the maximum speed of the connection.
quality or the frame rate when bandwidth increases or decreases. Select Video
Motion to have the camera maintain the frame rate and reduce image quality
when bandwidth is insufficient. Select Image Quality to have the camera main-
tain image quality and reduce frame rate when bandwidth is insufficient. Select
Better Quality to have the camera maintain frame rate and increase quality
when bandwidth is sufficient. Select Best Quality to have the camera maintain
the frame rate and increase quality to the maximum speed of the connection.
3.7.
Time Display on Video: Tap to select ON to enable time stamps on video or
OFF to disable time stamps.
OFF to disable time stamps.
3.8.
Video flip: Tap to select Video Flip to flip the camera image vertically and hori-
zontally or select Normal for the normal orientation. This is useful if the camera
has been mounted to a wall or ceiling upside down.
zontally or select Normal for the normal orientation. This is useful if the camera
has been mounted to a wall or ceiling upside down.
4. Tap Video Settings when finished making changes, then tap Update to save your
settings.
20.4.5
Configuring LED Control and Motion Detection Sensitivity
Configure the behavior of the camera’s status LED’s. This is useful if you want the camera
to be harder to spot at night. You can also configure the sensitivity for video motion
detection.
to be harder to spot at night. You can also configure the sensitivity for video motion
detection.
#LX400003; r. 2.0/14027/14265; en-US
137