Lorex LNC216 Owner's Manual
Note
To connect to multiple cameras, click to select a display area. The area becomes highlighted. Then, dou-
ble-click the camera to open it in the selected area.
To connect to multiple cameras, click to select a display area. The area becomes highlighted. Then, dou-
ble-click the camera to open it in the selected area.
14.2
Mac WiFi Setup
The camera must be connected to your router using an Ethernet cable before you can set
it up to use WiFi.
it up to use WiFi.
1. Install L-View on a Mac in your local network (must be connected to the same router
as the camera) and connect to the camera.
2. Right-click on the camera ID in the Auto Search area and click Web Configure.
3. Enter the camera admin user name and password. By default, the admin user name is
admin and the admin password field is left blank. Click Log in. The Web Configure
interface opens in your default web browser.
interface opens in your default web browser.
Note
Your camera admin user name and password differs from the password used to connect to your
camera to view video.
Your camera admin user name and password differs from the password used to connect to your
camera to view video.
#LX400003; r. 2.0/14027/14265; en-US
44