Lorex LNC216 Owner's Manual
The Display sub-menu contains the following controls:
• Full window: Open the camera in single camera view.
• Auto reconnect: L-View will attempt to reconnect to the camera if it becomes
• Auto reconnect: L-View will attempt to reconnect to the camera if it becomes
disconnected.
• Stop: Disconnect from the camera.
• Properties: Click to view video properties.
• Properties: Click to view video properties.
Video Properties
15.2.2
All Camera Action
Press
to open the All Camera Action menu.
The All Camera Action Menu contains the following controls:
• Snapshot all: Take a snapshot from all connected cameras.
• Play all: Connect to all cameras selected in display grid.
• Pause all: Pause video for all connected cameras. Click Pause all again to resume
• Play all: Connect to all cameras selected in display grid.
• Pause all: Pause video for all connected cameras. Click Pause all again to resume
video.
• Disconnect all: Disconnect from all connected cameras.
• Clear all connection info: Remove all cameras from the display grid.
• Clear all connection info: Remove all cameras from the display grid.
15.3
Camera List (Managing Cameras)
The Camera List is used to save connection information for your cameras, so you don’t
have to re-enter the ID or password each time you connect. The Camera List also allows
you to configure certain camera settings.
have to re-enter the ID or password each time you connect. The Camera List also allows
you to configure certain camera settings.
Cameras connected to the Internet or local network are shown in blue in the camera list.
Cameras not connected are shown in red. If your camera is red, check the network
connection.
Cameras not connected are shown in red. If your camera is red, check the network
connection.
Note
Cameras may appear in red before you have connected to them the first time.
#LX400003; r. 2.0/14027/14265; en-US
50