Funai DV220FX4 Owner's Manual

PRECAUTIONS

PREPARATION

ADVANCED PLAYBACK

BASIC OPERATIONS

RECORDING

OPTIONAL SETTINGS

TROUBLESHOOTING

INFORMATION

EN

EN

In the setup menu, you can customize the various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menus.
1) Press [SETUP].
2) Use [s / B] to select a setup item.
3) Use [K/ L] to go up or down in the menu list.
4) Press [OK] to access the sub contents of the highlighted item.
5) Use [K/ L] to select a setting.
6) Press [SETUP] to exit.
• The following table is the contents which you can set and the default settings. Refer to the table for useful operation.
• Your change to each setting stays activated even when the unit is turned off.

AUDIO

ORIGINAL
ENGLISH
FRENCH
SPANISH

••

•

OTHER

Set the language for 
audio.

• Language options are not available with some discs.
• Only the languages supported by the disc can be selected.
• “LANGUAGE” setting for “AUDIO” and “SUBTITLE” are not

available with some discs. Then use [AUDIO

] and [SUBTITLE].

Refer to page 19.

SUBTITLE

OFF
ENGLISH
FRENCH
SPANISH

••

•

OTHER

Set the language for 
subtitles.

DISC MENU

ENGLISH
FRENCH
SPANISH

••

•

OTHER

Set the language for 
disc menu language.

PLAYER MENU

ENGLISH
FRANÇAIS
ESPAÑOL

Set the language for 
OSD (on-screen
display).

TV ASPECT

4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE

Set the picture size
according to aspect 
ratio of your TV.

• Select “4:3 LETTER BOX” so that black bars may appear on the 

top and bottom of the TV screen.

• Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.
• Select “16:9 WIDE” if a wide-screen TV is connected to this unit.

STILL MODE

AUTO
FIELD
FRAME

Set the type of still 
image in pausing 
playback.
Select “AUTO”
usually.

• “AUTO” automatically selects the best resolution setting 

(“FRAME” or “FIELD”) based on the data characteristics of the
pictures. Some pictures may be blurred when you select “AUTO”
in the still mode due to their data characteristics.

• An individual picture on the TV screen is called a “frame”, which 

consists of two separate images called as “field”.

• If you select “FIELD”, the picture in the still mode will be

stabilized. If you select “FRAME”, the picture in the still mode will 
be highly defined.

DRC
( Dynamic Range Control)

ON
OFF

Set to “ON” to
compress the range 
between soft and 
loud sounds.

• This function is available only on the discs which are recorded in

the Dolby Digital format.

DOWN SAMPLING

ON
OFF

Set to “ON” when
outputting in 48kHz.
Set to “OFF” when
outputting the
original sound.

• When playing back a 96kHz disc with the copyright protection, 

the sound will be down sampled at 48kHz even if the “DOWN 
SAMPLING” is set to “OFF”.

• This function is available only on digital outputting of a disc

recorded in 96kHz.

DOLBY DIGITAL

BITSTREAM
PCM

Set the type of sound 
signal which outputs 
from the digital 
audio output jack.

• Select “PCM” when the unit is connected to a 2ch digital audio

device.

• Select “BITSTREAM” when the unit is connected to a Dolby 

Digital decoder.

PASSWORD

NO
YES

Enter the password.

LEVEL

LEVEL8 [ADULT]
LEVEL7 [NC-17] to
LEVEL1 [KID SAFE]

Set the parental level for DVD playback. (Refer to page 24.)

CHANGE

Set and change the password. (Refer to page 24.)

ANGLE ICON

ON
OFF

Set whether to display the angle icon or not.