Avanti 5.1 Cu. Ft. Beverage Center - Stainless Steel Glass Door Instruction Manual
Door Reversal
The door is 25Lbs. by itself, so get a friend to help.
The door is 25Lbs. by itself, so get a friend to help.
1) Open the door.
2) Remove the two screws that hold the door to the right bottom hinge.
2) Remove the two screws that hold the door to the right bottom hinge.
3) Remove door by pulling out and away from the top hinge. Set door aside for now.
4) Take out right lower hinge and replace it with left lower hinge that came in the
4) Take out right lower hinge and replace it with left lower hinge that came in the
bag with the accessories, apply parts on the opposite side.
5) Unscrew the upper hinge pin, remove it, and replace it on the opposite side.
6) On the door, you will see a plug on the right side take this plug out and insert it
6) On the door, you will see a plug on the right side take this plug out and insert it
on the opposite side.
7) Turn the door over and remove the two screws that are on the left side. Save the
screws for the next step.
8) Install the door by positioning the top hinge pin into the bushing then putting the two
screws in place on the bottom of the door. Some alignment might be necessary to make
the door close properly.
the door close properly.
9) Remove and replace the handle on the opposite side of the door.