Summit 50 lbs. Built-in Ice Maker - Integrated Frame Door User Manual
26
2. While in the Ice Size Adjustment mode, press the “Clean” (-) button or the “Mode” (+)
button for the desired ice size.
Smaller ice setting
By pressing the “Clean” (-) button, you can decrease the size of the ice cubes. The “ICE”
LED (green) will flash as you lower the ice size and will finally be blinking at the setting
of smallest ice size.
LED (green) will flash as you lower the ice size and will finally be blinking at the setting
of smallest ice size.
:
Larger ice setting
By pressing the “Mode” (+) button, you can increase the size of the ice cubes. The “BIN
FULL” LED (red) will flash as the larger size is set and will blink when the setting of
largest ice size has been reached.
FULL” LED (red) will flash as the larger size is set and will blink when the setting of
largest ice size has been reached.
:
After 10 seconds without any operation, the unit will return to the previous mode.
NOTE: During the ice size adjustment, the “BIN FULL”, “ICE” and “HARVEST”
LEDS blinking all at once indicate that the unit is in the default factory setting of
the ice size.
the ice size.
MAJOR FUNCTIONS
1. The operating procedure is completely automatic.
2. When the ice storage bin is full of ice cubes, the machine stops making ice
automatically. It starts making ice again after ice cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. A sensitive probe and accurate timer enhance the performance of the ice maker.
5. A compressor protection system is built in.