Electrolux E30WV60PPS Owner's Manual

For Mobile Home Installations
The installation of this hood insert must conform to the 
Manufactured Home Construction Safety Standards, 
Title 24 CFR, Part 328 (formerly the Federal Standard 
for Mobile Home Construction and Safety, Title 24, 
HUD, Part 280) or when such standard is not appli-
cable, the standard for Manufactured Home
Installation 1982 (Manufactured Home Sites, Commu-
nities and Setups) ANSI A225.1/NFPA 501A, or latest 
edition, or with local codes.

 Location Requirements

 

IMPORTANT: Observe all governing codes and ordi-
nances. Have a qualified technician install the hood 
insert. It is the installer’s responsibility to comply with 
installation clearances specified on the model/serial
rating plate. The model/serial rating plate is located 
behind the left filter on the rear wall of the hood
insert.
The range hood location should be away from strong 
draft areas, such as windows, doors and strong heat-
ing vents.
Grounded electrical outlet is required.
All openings in ceiling and wall where range hood will 
be installed must be sealed.
 

Location requirements

 

Product dimensions

12"

(30.5 cm)

2" 

(5.1 cm)

30" (76.2 cm)
36" (91.4 cm)

23" (58.4 cm)

10" 

(25.4 cm)

"

(1.0 cm)

2

" 

(6.5 cm)

7½"

(19.0 cm)

29 " (74.0 cm)

35 " (89.2 cm) 

 

Remove the grease filters.

 

The rating plate is located behind the filter by the  

  electrical box.