Electrolux EI30DD10KS Installation Instruction

-  Check for and remove obstructions. The telescoping vent is designed to tilt and 

stop with obstructions. The raise/lower push button will reverse direction of travel 

and reset the telescoping vent travel. Allow the telescoping vent to fully raise or 

lower after encountering an obstruction.

-  If the telescoping vent does not response to the raise/lower push button, it can be 

straightened or helped along by hand and the switch should be tried again.

- 

DO NOT attempt to lubricate the telescoping vent. It is factory lubricated for life.

-  Make sure telescoping vent is in the upper most position.
-  Make sure the blower slide adjustment is not in the off position.
-  If used for an extended period of time, allow the blower to cool. The blower is 

thermally protected and will shut off until cooled sufficiently. It will resume normal 

operation when cool.