Electrolux EI30DD10KS Installation Instruction

The downdraft blower system draws 4 AMPS and 

requires a 120 VAC, 60 Hz circuit.
The unit has a 28 inch long power cord with a 3 

pronged grounded plug. Plan to provide a grounded 

outlet in a location which will allow the unit’s power 

cord to reach.

Recommended 

Electrical Outlet 

Locations 

(All Shaded Areas)

All vertical dimensions relative to top surface of the 

countertop.
All horizontal dimensions relative to cutout in the 

countertop.
Ensure that access to the electrical outlet will not 

be blocked by the ducting after installation.

Electrical Outlet Location

Model

M - From Center

EI30DD10SK

13 ½” (34.3 cm)

EI36DD10SK

16 ½” (42.0 cm)

7-7/8”

(20 cm)

8-3/4”

(22.2 cm)

6-1/2”

(16.5 cm)

19-1/16”

(48.4 cm)

23-3/4”

(60.3 cm)

4-5/8"

(11.8 cm)

9-1/2"

(24.1cm)

14-3/4"

(37.5 cm)

22-1/8"

(56.2 cm)

- Mount a standard wiring box, with 3-pronged 

grounded receptacle, inside the cabinet. Make sure 

the downdraft’s power cord can easily reach it.
- Run appropriate power cable into cabinet and 

connect it to receptacle.

If the 30” model is being installed in a 30” wide 

cabinet or the 36” model in a 36” wide cabinet, 

the outlet cannot be located on the back wall of 

cabinet.
Outlet may also be wall-mounted with access hole 

in cabinet.