Electrolux EW30GS80RS Owner's Manual

•

Do not close the oven door until all the interior 

oven racks are fully inserted and retracted to 

the back of the oven.

•  Do not hit the glass with pots, pans, or any

other object. The oven door glass may break or 

even break at a later time unexpectedly.

•  Scratching, hitting, jarring or stressing the oven

door glass may weaken its structure causing 

an increased risk of breakage at a later time.

•  You may use a glass cleaner on the outside

of the oven door glass. 

Do not spray or allow 

water or the cleaner to enter or drip down into 

the oven door vents. Spray cleaner on cloth 

first and then wipe the oven door clean.

•

Do not use strong oven cleaners, powders or 

any harsh abrasive cleaning materials on the 

outside of the oven door or glass.

•

Never clean the oven door gasket. The oven 

door gasket should always clean during the 

Self-clean cycle.

 

Most oven doors contain glass that can break. 

Read the following recommendations:

1.   Turn electrical power off at the main source.
2.  Remove interior oven light shield by turning a 

quarter turn counter-clockwise.

3.  Replace bulb with a new T-4 type Halogen 25 

watt appliance bulb.

IMPORTANT! Do not allow your fingers to touch

the new bulb when replacing. This will shorten the 

life of the bulb. Use a paper towel or cotton glove 

while handling the new bulb when installing.
4.  Replace glass oven light shield by rotating 

clockwise.

5.  Turn power back on again at the main source 

(or plug the appliance back in).

6.  Be sure to reset the time of day on the clock.

Be sure the range is unplugged and all parts

are COOL before replacing oven light. Wear 

a leather-faced glove for protection against 

possible broken glass.

The interior oven lights are located at the rear 

of the oven cavity and are covered with a glass 

shield. The glass shield must be in place whenever 

the oven is in use.