Electrolux EW30GS80RS Owner's Manual

The glass in the double ring is designed to fit

loosely. Clean with normal non abrasive glass type 

cleaner and thoroughly dry before replacing. 

Figure 1 - Cooktop burner head

(All burners except Double ring burner)

Figure 2 - Double ring burner head

(Models equipped with double ring burner only)

Your appliance is shipped with the burner heads 

and burner caps in the correct locations. Before

using your gas appliance be sure to:
● Follow installation instructions before operating.

● Remove all packing tape from cooktop area.

Should you ever need to remove the burner caps 

for cleaning lift the burner cap off the burner 

head. Clean heavy soils with an absorbent cloth. 

Rinse with a clean, damp cloth and immediately 

thoroughly dry including the bottom and inside of 

the cap. Do not use harsh abrasive cleaners. They

can scratch the porcelain on the cap. Do not clean

burner caps in dishwasher. 
When placing the burner caps, see Important note 

below.

 

When placing the burner caps on the cooktop, be 

sure the burner caps are seated firmly on top of 

burner heads. Improper flame size and uneven

heating may result when any surface burners are 

turned ON and the burner caps are not seated 

correctly.

Lift the burner cap from the burner head. The 

surface burner heads are secured to the cooktop 

and 

must be cleaned in place.

For proper gas flow it may be necessary to clean

the burner heads and slots. To clean, first use a

clean DAMP cloth to soak up any spills. Remove

any food from between the burner slots using a 

small nonabrasive brush like a toothbrush and 

afterwards wipe using a damp cloth. For stubborn 

soils located in the slots, use a small-gauge wire or 

needle to clean.

Should you experience ignition problems it may be 

that an ignition port hole is partially blocked with 

soil (see figs 1 & 2). With the burner head in place,

use a small wire gauge needle or the end of a 

paper clip to clear the ignition port or ports.

Ignition 

port

● To avoid possible burns use care when 

cleaning the cooktop. 

DO NOT attempt to clean 

the cooktop whenever the cooktop or burner 

heads are still hot.

● To avoid possible burns DO NOT attempt any 

of the following cleaning instructions provided 

before turning OFF all of the surface burners 

and allow them to cool.

● To avoid possible burns DO NOT attempt to 

operate the surface burners without the burner 

caps.