Electrolux EI24MO45IBEI27MO45TB Owner's Manual

Page of 30
E
25
More or less time adjustment 
Should you discover that you like any of the Sensor 
Modes, Auto Cook, Quick Settings or Defrost slightly 
more done, press the 
power level pad once after 
pressing  your  choice  of  pads  or  before  pressing 
START pad. The display will show MORE
Should you discover that you like any of the Sensor 
Modes,  Auto  Cooks,  Quick  Settings  or  Defrost 
slightly less done, press the 
power level pad twice 
after pressing your choice of pads or before pressing 
START pad. The display will show LESS.
Quick Start
quick start is a short-cut method to set time for 1-6 
minutes at power level 10.
•  Suppose  you  want  to  heat  a  cup  of  soup  for
two minutes. 
Procedure
Step
Press
Press number 2 pad.
2
The oven will start immediately and will signal then 
turn off automatically when finished.
Add 30 Seconds
add  30  seconds  provides  a  convenient  way  to 
extend cooking time by 30 seconds while the oven 
timer is counting down. It will add 30 seconds to the 
time shown each time the pad is pressed.
This  pad  may  also  be  used  as  a  quick  start  for 
30 seconds of cooking. No need to press START
the oven will start immediately.
Help
Each  setting  has  a  cooking  hint.  If  you  wish  to 
check, press 
user pref whenever HELP is lighted 
in the Interactive Display for these and other manual 
operation hints.
Multiple sequence cooking 
Your oven can be programmed for up to 4 automatic 
cooking sequences, switching from one power level 
setting to another automatically.
Sometimes cooking directions tell you to start on 
one power level and then change to a different power 
level. Your oven can do this automatically.
•  Suppose  you  want  to  cook  roast  beef  for
5  minutes  at  100%  and  then  continue  to  cook 
for 30 minutes at 50%.
Procedure
Step
Press
1.  Enter cooking time.
5
 
0
 
0
2. Press 
power level pad 
once for 100% power.
power
level
 x 1
3. Enter second cooking 
time.
3
 
0
0
 
0
4. Press 
power level pad 
6 times for 50% power.
power
level
 x 6
5. Press 
START pad.
START
 NOTE
If 100% is selected as the final sequence, it is 
not necessary to press the 
power level pad.
Convenient Features
TINSLB003.indb   25
12/11/08   9:30:43 AM