Electrolux EI26SS30JB Owner's Manual

You can easily adjust shelf positions in the freezer 
and fresh food compartments to suit your needs. 
The shelves have mounting brackets which 
attach to slotted supports at the rear of each 
compartment.

 1  Before adjusting a shelf, remove all food. 
 2  Lift the front edge up.
 3  Pull the shelf out.
 4  Replace by inserting the mounting bracket 

hooks into the desired support slots. 

 5  Lower the shelf and lock into position.

Your refrigerator includes Luxury-Design

TM

 glass 

shelves, which are designed to catch and hold 
accidental spills. These shelves slide out for easy 
access to food and faster cleaning.

Sliding shelves can be pulled forward as far as 
their built-in stops allow. Sliding shelves cannot be 
separated from their mounting brackets.

Your refrigerator includes a variety of storage 
drawers. These drawers usually are located in 
fixed positions at the bottom of the fresh food 
compartment. 

Crisper drawers are designed for storing fruits, 
vegetables, and other fresh produce. Before storing 
items in a crisper: 

 •  Wash items in clear water and remove

excess water.

 •  Wrap any items that have strong odors or

high moisture content.

Tighten Spacers
to Remove Shelf

Loosen Spacers
to Stabilize Shelf
Against Liner

Features may vary according to model.

Leafy vegetables keep best when stored with 
the Humidity Control set on Higher Humidity,
or in a drawer without a Humidity Control. This
keeps incoming air to a minimum and maintains 
maximum moisture content.

The Cantilever Sliding Glass Shelf has spacers 
(side screws) on the sides of the brackets to 
securely hold the shelf in place.
To relocate the shelf to a different location, the 
spacers must be turned in (clockwise). To secure 
the shelf in a new location, remember to turn the 
spacers out (counterclockwise) until they touch 
the sides of the compartment.