Electrolux EIFLS60JIW Installation Instruction

ELECTRICAL SHOCK HAZARD

Failure to disconnect power source before servicing 
could result in personal injury or even death.  

B) Removing Door from Hinge

 

1  Reopen door to 90 degree angle.

 

2  Remove 4 long, course-thread, counter-sunk 

hinge screws from door. 

A) Removing Trim Ring

 

1  Open the door to a 90 degree angle.

 

2  Remove and save the trim plug and long, 

course-thread, panhead screw. 

 

3  Close the door.

 

4  Rotate the door trim approximately ¾” 

counter-clockwise and pull it away from the 
front of the door.

 

3  While supporting the weight of the door 

with both hands, separate the door from the 
hinge.

 

4  Gently place the door face down on a fl at, 

covered work surface. 

 

1  Be sure you have adequate swing area before reversing door.

 

2  You will need a screw driver with a #2 square bit.

 3 Protect 

fl at work surface, such as top of washer or fl oor near 

washer, with a soft cloth or towel.

 

4  Be sure washer is unplugged from power source!

Screwdrivers with

#2 square &

straight bit