Siemens SE551 S30853-H1029-R701 User Manual
Product codes
S30853-H1029-R701
86
Configuring the Advanced Settings
Gigaset SE551 WLAN dsl/cable / ENG / A31008-M1029-B101-2x-7619 / configure_router.fm / 03.11.2008
Sc
hablone 200
4_12
_27
Web Server
Your device's integrated Web server allows you to publish data on a connected USB bulk
memory (e.g. USB stick or USB hard disk) on the Internet.
Internet users can access your Web server by entering the public IP address in their Inter-
net browser. As Internet providers often change this each time someone dials in, it is
worth using dynamic DNS (see page 66) in addition.
memory (e.g. USB stick or USB hard disk) on the Internet.
Internet users can access your Web server by entering the public IP address in their Inter-
net browser. As Internet providers often change this each time someone dials in, it is
worth using dynamic DNS (see page 66) in addition.
ì
Connect a USB data carrier to the Gigaset SE551 WLAN dsl/cable via the USB port.
On the Advanced Settings – USB screen, you can check the status of the connec-
tion to the USB bulk memory.
On the Advanced Settings – USB screen, you can check the status of the connec-
tion to the USB bulk memory.
ì
In the Advanced Settings menu, select Web Server.
ì
Activate your device's integrated Web server.
ì
Select the Partition on the connected data carrier to which you wish to save the data
for the Web server.
for the Web server.
Note:
Depending on the status of the software in your device, it is possible that not all
Web server functions will work exactly as described below. If necessary, check
whether a software upgrade is offered on the Internet.
Depending on the status of the software in your device, it is possible that not all
Web server functions will work exactly as described below. If necessary, check
whether a software upgrade is offered on the Internet.