Philips HTS3265/98 User Manual
17
English
Basic Connections
(continued)
Step 4: Connecting the
FM antenna
A
Connect the FM antenna (supplied) to
the FM 75
Ω
socket. (For some models,
it has been connected in the factory.)
B
Extend the FM antenna and fi x its ends to
the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antenna for
optimal reception.
– Position the antenna as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
– Adjust the position of the antenna for
optimal reception.
– Position the antenna as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Step 5: Connecting the
power cord
Notes:
– For power supply rating, refer to the
rear or bottom of the main unit.
– Turning off to standby mode does not
disconnect the unit from mains.
– For power supply rating, refer to the
rear or bottom of the main unit.
– Turning off to standby mode does not
disconnect the unit from mains.
A
When all the connections are complete,
set the voltage selector to the local
power line voltage.
power line voltage.
B
Connect the AC power cord to the
power outlet.
The standby LED on the main unit
lights up.
Helpful Hint:
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
FM antenna
Main Unit (rear)
Main Unit (rear)