Philips HTS3265/98 User Manual

Page of 53
37
English
Audio Setup 
(underlined options are the factory default settings)
Speakers Volume    Access the speaker’s level setup menu. Use     keys to adjust 
the volume level for each connected speaker between -6dB to 
+6dB. See ‘Getting Started - Setting the speakers’ channels’.
Speakers Delay 
  Access the speaker’s distance setup menu. Use     keys to set 
the delay times for the centre and rear speakers based on the 
listening position and distance. See ‘Getting Started - Setting 
the speakers’ channels’.
 
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot 
change in distance. Use the longer delay time settings when the rear 
speakers are closer to the listener than the front speakers.
CD Upsampling 
  This feature enables you to convert the music CD to a 
higher sampling rate using sophisticated digital signal 
processing for better sound quality. 
Off } 
–  Turn off CD-upsampling.
{  88.2 kHz (X2) }  –  To convert the sampling rate of the 
CDs twice as high as the original rate.
Notes:  
–  This function is not available if you switch to Multi-channel mode.
–  If you press SURROUND on the remote control, it turns off the 
CD upsampling feature.
Audio Sync 
  This feature allows you to adjust the audio delay times if the 
video playback is slower than the audio output streams.
 Use 
   keys to set the delay times for the audio output 
between 0~200ms.
Setup Menu Options 
(continued)