Edimax 10/100/100FX Fibre Converter ET-912SC3+ User Manual
Product codes
ET-912SC3+
100Base
Best media conversion solutions for network conne
Edimax’s full series of Media Converter are designed to
provide the whole Ethernet / Fast Ethernet network imp
provide the whole Ethernet / Fast Ethernet network imp
Migrating between copper and fiber-based Medium
ET-912+ series convert the signals between two differe
cost-effective method to migrate between UTP cable an
(multimode) and 30/40/60/80/100km (single-mode) in fi
cost-effective method to migrate between UTP cable an
(multimode) and 30/40/60/80/100km (single-mode) in fi
Comply with IEEE Standards
ET-912+ series are fully compliant with IEEE 802.3 10B
ET 912 series are fully compliant with IEEE 802.3 10B
The device comes with one RJ-45 port to connect to a
and one fiber connection to connect a 100Base-FX dev
The device comes with one RJ-45 port to connect to a
and one fiber connection to connect a 100Base-FX dev
Built in Switching ASIC
ET-912+ series have turned the function more like a 2 p
switching benefits such as frames checking and filtering
switching benefits such as frames checking and filtering
Feature LED and Fiber link alarm
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In
and maintain their critical fiber link more effectively.
and maintain their critical fiber link more effectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all
this action can make sure fiber port and TP port work n
cause the power
electricity suddenly down in an instant time
this action can make sure fiber port and TP port work n
cause the power
electricity suddenly down in an instant time
electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and fiber port to the device havin
Features
•Compliant with IEEE 802.3 10BaseT and IEEE 802.3u
•One 10/100BaseTX Ethernet TP Port and One 100Bas
•One 100BaseFX Fiber Port can support either Multi (S
•TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X
•Providing a slide switch for Full- and Half-Duplex selec
•Multiple Fiber Connectors
•Providing 19” Converter Chassis for up to 16 slots with
•One 10/100BaseTX Ethernet TP Port and One 100Bas
•One 100BaseFX Fiber Port can support either Multi (S
•TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X
•Providing a slide switch for Full- and Half-Duplex selec
•Multiple Fiber Connectors
•Providing 19” Converter Chassis for up to 16 slots with
ET-912+ Series
e 10/100BaseTX To 100Base-FX
Media Converter
ectivity
o meet the needs for massive optical fiber network,
plementation.
m
ent transmission medium, allowing user a simple and
nd fiber optic cable. It can transmit signals up to 2km
iber medium, allowing users to extend network.
iber medium, allowing users to extend network.
Base-T and 802.3u 100Base-TX, 100Base-FX standards.
Base T and 802.3u 100Base TX, 100Base FX standards.
10/100Base-TX device such as workstation or switch
vice.
ports switch than a traditional converter. User can get all
g.
g.
addition, Fiber Link Alarm could allow user to monitor
l chipsets in converter as power voltage drop below 2.9V,
normally when thunder storm or power unstable occuring
ng the media convertibility.
u 100BaseTX/100BaseFX Standards
seFX Ethernet Fiber Port
SC/ST) or Single (SC, LC, MT-RJ) Mode
X and Auto-Negotiation
ction on FX Port
h redundant power supply for optional expansion use