Philips BM50B/10 User Manual

Play in group mode

Group mode: If you have more than one

izzylink-compatible multiroom speakers, you can

create a group and stream music to the group

of speakers at the same time.

To use this feature, you need to purchase

more than one izzylink-compatible multiroom

speakers.

Note

•

You can create a group of up to five speakers, with one

as the master and four as slaves.

Create a group

Note

•

Whenever you create a group, the first speaker that

you enable the group function will act as the master.

Hold GROUP on the first speaker for 3

seconds (The master).

Hold GROUP on a second speaker for 3

seconds (The slave).

Wait for 15 to 30 seconds for connection

setup.

Repeat steps 1 to 3 to add more slave

speakers one by one.

Note

•

You can only add slave speakers one by one. Each time

when you add a slave speaker, first press and hold

GROUP on the master speaker until the indicator on

the button flashes and the speaker beeps.

•

If the signal strength indicator on a slave speaker shows

that the signal is poor, move it closer to the master

speaker.

You can add any of the following speakers into the

existing group or create a new group with them:

• A speaker with factory default settings

• A master speaker that has no slave

connected to it

• A slave speaker that is disconnected from

its master (with the GROUP indicator

flashing)

Play from the master to the whole group

Note

•

In Bluetooth mode, music playback pauses when there

is an incoming call or video recording is in progress on

the connected mobile phone.

• If this speaker (BM50) acts as the master,

select a source and play to the whole group of

speakers.