Manualsbrain.com
  1. Manuals
  2. Brands
  3. Philips
  4. BTB2315/12
  5. User Manual

Philips BTB2315/12 User Manual

Download
Page of 26
8
EN
  
Demonstrate the features
In standby mode, press   to demonstrate 
features of this device.
 
»
The features are displayed one by one 
across the display panel.
•  To turn off the demonstration, press 
 again.
Prepare the remote control
Caution
 
•
Risk of explosion! Keep batteries away from heat, 
sunshine or fire. Never discard batteries in fire.
 
•
Risk of decreased battery life! Never mix different 
brands or types of batteries.
 
•
Risk of product damage! When the remote control is 
not used for long periods, remove the batteries.
To insert the remote control battery:
1 
Open the battery compartment.
2 
Insert the supplied AAA battery with 
correct polarity (+/-) as indicated.
3 
Close the battery compartment.
  
Set clock
1 
In standby mode, press and hold CLOCK 
on the remote control for more than two 
seconds.
 
»
[24 HOUR] or [12 HOUR] hour 
format is displayed.
2 
Press   /   to select [24 HOUR] or 
[12 HOUR] hour format.
3 
press CLOCK to confirm.
 
»
The hour digits are displayed and begin 
to blink.
4 
Press   /   to select hour and press 
CLOCK to confirm.
 
»
The minute digits are displayed and 
begin to blink.
5 
Press   /   to select minute and press 
CLOCK to confirm.
 
»
[SYNC ON] is displayed on the LCD 
screen.
6 
Press   /   to select whether to 
synchronize the system clock with an RDS 
radio station that transmits time signals, 
and then press CLOCK to confirm.
Note
 
•
If no button is pressed in 90 seconds, the system exits 
clock setting mode automatically.
Tip
 
•
You can view clock information in power-on mode by 
pressing CLOCK.
Turn on
Press  .
 
»
The unit switches to the last selected 
source.