Bosch d9412gv3 User Manual

D9412GV3/D7412GV3 | Program Entry Guide | 4.0  Schedules (Skeds) 

EN | 106 

 

 

Bosch Security Systems, Inc. | 10/11 | F01U170807-02 

 

Open Early Begin: This program item is one of three 
required to create an Opening Window. To finish 
programming an Opening Window, Open Window 
Start and Open Window Stop must be programmed. 
The time programmed in the W# Open Early Begin 
field is the earliest time that the user is allowed to 
open an area before the Opening Window Start time. 
If Opening and Closing Reports are enabled, 
disarming the area between midnight and the open 
Early Begin time generates an Opening Report. 
  If A# Disable O/C in Window is set to Yes and 

the area is disarmed between the Open Early 
Begin time and the Open Window Start time, the 
Opening event is sent with an Early to Open 
modifier. If the Open Early Begin time is the 
same as the Open Window Start time, no 
Opening Event is sent.  

  If Disable O/C in Window is set to No and the 

area is disarmed at any time, an Opening Event 
is sent without an Early to Open or Late to Open 
modifier. 

Disarming the area between the Open Window Start 
and open Window Stop times creates a local event in 
the control panel event log, but does not send the 
Opening Report to the central station. 
Disarming the area between the Open Window Stop 
time and before the next window’s Open Early Begin 
time (or midnight, whichever is earlier) generates an 
Opening Event with a Late to Open modifier. 
When configuring multiple windows to operate on the 
same day, ensure that they are added to the system 
in chronological order. For example, if three windows 
are programmed to execute on Tuesday, Window 1 
(W1) must occur before Window 2 (W2), and Window 
2 must occur before Window 3 (W3).  

 

Avoid programming the Open Early Begin 
time before a time that is between 
another window’s Open Window Start 
and Open Window Stop times. 

 

 

Do not program a window to cross the 
midnight boundary. 

Disabled windows have a beginning time of 00:00. If 
the entry for this prompt is 00:00, but times are 
programmed for Open Window Start and Open 
Window Stop, the window is disabled. 
To disable the window, all hours and minutes spaces 
must be 00:00. 

 

Make time entries using a 24-hour clock. 
For example: 

Midnight is entered as 00:00 
7:00 AM is entered as 07:00 
2:45 PM is entered as 14:45 
11:59 PM is entered as 23:59 

Reboot the control panel to activate today’s window, 
if the window needs to activate on the same day you 
program it.