Bosch d9412gv3 User Manual

Page of 154
D9412GV3/D7412GV3 | Program Entry Guide | 2.0  Panel and Area Wide Parameters 
EN | 77 
 
 
Bosch Security Systems, Inc. | 10/11 | F01U170807-02 
 
2.10.8  SIA Duress Passcode Options 
USER INTERFACE
 Authority Levels L## 
Disarm 
USER INTERFACE
 Authority Levels L## Send 
Duress 
USER INTERFACE
 Authority Levels L## 
Passcode Disarm 
General Programming Information 
User Authority Index 14 is programmed by default as 
a duress disarm profile. When Duress Option is 
configured with a value of 3, the SIA CP-01 compliant 
Duress Passcode feature is enabled. With Authority 
Index 14 assigned to a user passcode in an area, 
that user has the authority to disarm and send a 
duress event from that area. 
A Duress Disarm user authority index requires: 
L## Disarm set to E 
L## Send Duress set to E 
L## Passcode Disarm set to E 
For SIA CP-01 Compliance 
Duress Types 1 and 2 (refer to Duress Type on page 
36) are not allowed for use in SIA CP-01 compliant 
installations. All duress-capable passcodes must be 
unique and cannot be derived from other passcodes. 
To facilitate this uniqueness, user Authority Index 14 
is preprogrammed from the factory as an example of 
duress disarm authority. 
2.11 Function 
List 
The Function List is accessed when the user presses 
[MENU] (or the key corresponding to menu on the 
D1260) while the keypad shows the idle text. 
Program as many as 32 M### Function(s). 
Each CC # keypad address can display a 
combination of any of the 32 menu items. The D1255 
displays one menu item at a time. The D1260 
displays up to two menu items at a time. Each 
keypad address has one Function List. The function 
name shown in the Functions column in the program 
record sheet appears in the keypad display in capital 
letters. For example, WATCH MODE appears when 
you select #6 Watch Mode. 
Menu Item 
Default: 
Refer to the program record sheet 
Selection:  1 to 32 
Enter the menu item number you are programming. 
The M## Function displays items sequentially in the 
order they are programmed. The M1 Function is the 
first function that appears in the menu and M32 
Function is the last function that appears when 
scrolling through the menu. 
 
Failing to program Menu Item 1 causes 
COMMAND DISABLED to appear in the 
keypad display. 
M## Function 
Default: 
Refer to the program record sheet 
Selection:  0 to 30, 32 to 37, and 128 to 143 
(131 on D7412GV3) 
Enter the function number indicated in the “#” column 
of the program record sheet or next to the function in 
Section 2.10 User Interface on page 59. 
 
Function numbers 128 to 143 are custom 
functions and show the text programmed 
for CF ### Text
 
 
There is no restriction on how many times 
you can assign a specific function to the 
menu. By assigning a specific function 
more than once, you can assign the same 
function at different keypads so that their 
order is different in different areas.