EdgeStar TWR281 User Manual

Page of 13
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Symptoms Possible 
causes  Solutions 
 
 
 
 
 
 
 
 
The cooler 
turns on and 
off frequently. 
 
The room 
temperature is higher 
than the 
recommended 
ambient temperature 
(77°F). 
 
The door is being 
opened often. 
 
The door is not 
completely closed. 
 
The door gasket is 
not sealing properly. 
 
The cooler does not 
have the suggested 
ventilation. 
Run the cooler in the 
appropriate ambient 
temperature. 
 
Minimize the number of 
times the door is 
opened. 
 
Make sure the door is 
completely closed. 
 
Make sure the door 
gasket is properly 
sealing. 
 
Make sure the cooler 
has at least 2” on the 
sides and 4” in the back 
for clearance. 
 
 
 
 
 
 
The cooler 
makes too 
much noise. 
 
If the noise is from 
the fan, it may be 
normal operating 
noise. 
 
The unit is not level. 
 
Popping or crackling 
noises are coming 
from the unit. 
The fan makes normal 
fan noises when 
operating- this is normal. 
 
Make sure the cooler is 
on a level surface. 
 
Some popping or 
crackling noises are 
normal. They are caused 
by expansion and 
contraction of the inside 
walls due to temperature 
changes. 
 
 
 
 
The door will 
not shut 
properly. 
Your cooler is not 
level. 
 
The door gasket is 
dirty. 
 
The door gasket is 
malformed. 
 
The shelves are 
incorrectly installed. 
Make sure the cooler is 
on a level surface. 
 
Clean the door gasket. 
 
Make sure the door 
gasket is properly 
sealing. 
 
Correctly install the 
shelves. 
6. Limited Warranty 
 
This EdgeStar product is warranted to be free from defective workmanship 
and materials for the first year following the date of original purchase. 
Replacement parts will be supplied free of charge for the first year following 
the date of original purchase. Labor will be performed free of charge for the 
first 90 days following the date of original purchase. 
 
WHAT IS COVERED: 
This warranty applies to the original purchaser only, and only covers defects 
in workmanship experienced during operation of the product under normal 
 
9