Schneider Electric ION7650 User Manual
PowerLogic ION7550 / ION7650 Installation Guide
6
© 2007 Schneider Electric. All rights reserved.
Before You Begin
Before installing the meter, familiarize yourself with the steps in this guide and
read the safety precautions presented on the “Installation Considerations”
page.
read the safety precautions presented on the “Installation Considerations”
page.
D
ANGER
Do not power up the meter until the current and voltage wiring is completed.
Recommended Tools
Phillips screwdriver
Precision flat-head screwdriver
Wire cutters / stripper
Meter Overview
Front Panel Button Functions
PROG
/
SELECT
: Press the
PROG
/
SELECT
(program or select) button to enter Setup
mode. In Setup mode, press the
PROG
/
SELECT
button to accept changes.
ESC
: Press the
ESC
(Escape) button to return to a higher menu or discontinue a
configuration change.
NAVIGATION
: Press the
UP
/
DOWN
arrow buttons to highlight menu items, or
increment / decrement numbers.
Press the
LEFT
or
RIGHT
arrow buttons to move to an adjacent digit.
SOFTKEY
: Press a
SOFTKEY
button to select the parameter that you want to
configure from the sub-menus.
Navigation
Buttons
PROG
/
SELECT
Button
Softkeys
ESC
Button
Communications
Card
Form C
Digital Outputs
Digital
Inputs
Form A
Digital Outputs
Digital Inputs
Analog Inputs
Analog Outputs
Voltage and Current Inputs
Power
Supply
Ground
Terminal
Meter Front
Meter Back
Optical Port
I/O Expansion
Card
Operational
LEDs
ESC
PROG