DELL 201S User Manual
7-30
Dell PowerVault 200S, 201S, 210S, and 211S Storage Systems Installation and Service Guide
0
%,
4.
Using a Phillips-head screwdriver, turn the two captive screws clockwise until the
redundant fan is secured to the fan bay.
redundant fan is secured to the fan bay.
The redundant fan starts.
#
To install the second enclosure module (hereafter called module), perform the follow-
ing steps:
ing steps:
1.
Using a Phillips-head screwdriver, loosen the captive screw at the top of the ter-
minator blank on the right-side back of the storage system.
minator blank on the right-side back of the storage system.
2.
Grasp the handle on the terminator blank and pull it from the module bay (see
Figure 7-19).
Figure 7-19).