Q-Logic 59047-10 D User Manual
3–MIB-II Objects
sysUpTime (1.3.6.1.2.1.1.3)
59047-10 D
3-3
sysUpTime (1.3.6.1.2.1.1.3)
The time, in hundredths of a second, since the network management portion of
the system was last re-initialized.
the system was last re-initialized.
Syntax
TimeTicks
Access
read-only
Status
mandatory
Return Value
The time since the switch was powered on, or last reset (reset, hard reset, or
hot reset) was executed. For example, 3 days 21 hours, 5 minutes, and
26.84 seconds. The value will roll over after approximately 497 days of
continuous up time.
hot reset) was executed. For example, 3 days 21 hours, 5 minutes, and
26.84 seconds. The value will roll over after approximately 497 days of
continuous up time.
sysContact (1.3.6.1.2.1.1.4)
The textual identification of the contact person for this managed Node, together
with information on how to contact this person.
with information on how to contact this person.
Syntax
DisplayString (SIZE (0..255))
Access
read-write
Status
mandatory
Return Value
The default is: <sysContact undefined>. The string size is limited to a
maximum of 64.
maximum of 64.
sysName (1.3.6.1.2.1.1.5)
An administratively-assigned name for this managed Node. By convention, this is
the Node's fully-qualified domain name.
the Node's fully-qualified domain name.
Syntax
DisplayString (SIZE (0..255))
Access
read-write
Status
mandatory
Return Value
The defaults are: QLogic 5200 Series = SANbox, QLogic 5600 Series =
SANbox
SANbox