Panasonic PT-RZ370U User Manual

ENGLISH - 49

 

f

When a name is changed, display of the [USER] menu is also changed.

You can correct the image to the optimal vividness even if it is projected under a bright light.

Press as to select [DAYLIGHT VIEW].

Press qw or the <ENTER> button.

 

f

The 

[DAYLIGHT VIEW] individual adjustment screen is displayed.

Press qw to switch [DAYLIGHT VIEW].

 

f

The items will switch each time you press the button.

Corrects the image vividness automatically.

No correction.

Corrects the image to weaken vividness.

Corrects the image to medium vividness.

Corrects the image to high vividness.

 

f

If [REAR/FLOOR] or [REAR/CEILING] is selected with the [PROJECTOR SETUP] menu → [PROJECTION METHOD], [AUTO] cannot be 

set.

 

f

[AUTO] mode may not operate properly if objects are placed on top of the projector.

 

f

If [PICTURE MODE] is [NATURAL], [REC709], or [DICOM SIM.], the factory default setting is [OFF].

You can adjust the sharpness of the projected image.

Press as to select [SHARPNESS].

Press qw or the <ENTER> button.

 

f

The 

[SHARPNESS] individual adjustment screen is displayed.

Press qw to adjust the level.

Press the w button.

Contours become sharper.

0 - 15

Press the q button.

Contours become softer.

 

f

If you press w while the adjustment value is [15], the value will become [0]. If you press q while the adjustment value is [0], the value will 

become [15].

You can reduce noises when the input image is degraded and noise is occurring in the image signal.

Press as to select [NOISE REDUCTION].

Press qw or the <ENTER> button.

 

f

The 

[NOISE REDUCTION] individual adjustment screen is displayed.

Press qw to switch [NOISE REDUCTION].

 

f

The items will switch each time you press the button.

No correction.

Corrects the noise.

 

f

Setting the projector may result in an image that appears different from the actual image. In such a case, set it to [OFF].