Panasonic PT-RZ370U User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 75
[DIGITAL LINK INPUT]
Can only be selected when [STARTUP INPUT SELECT] is set to [DIGITAL LINK].
1)
Press as to select [DIGITAL LINK INPUT].
2)
Press qw to switch [DIGITAL LINK INPUT].
f
The items will switch each time you press the button.
[CURRENT]
Switches to DIGITAL LINK input.
[INPUT1]
Switches to DIGITAL LINK input, and that input switches to specified input when the Panasonic
twisted-pair-cable transmitter is connected.
[INPUT2]
[INPUT3]
[INPUT4]
[INPUT5]
[INPUT6]
[INPUT7]
[INPUT8]
[INPUT9]
[INPUT3]
[INPUT4]
[INPUT5]
[INPUT6]
[INPUT7]
[INPUT8]
[INPUT9]
[INPUT10]
Note
f
When the Panasonic twisted-pair-cable transmitter (such as optional digital interface box (Model No.: ET-YFB100G)) is connected to the
projector, its input name is reflected to [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is
disabled.
[RS-232C]
Set the sending and receiving port of the serial command.
Communicating using the <SERIAL IN> terminal
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
f
The
[RS-232C] screen is displayed.
3)
Press as to select [INPUT SELECT].
4)
Press qw to switch [SERIAL].
5)
Press as to select [BAUDRATE].
6)
Press qw to switch [BAUDRATE].
f
The items will switch each time you press the button.
[9600]
Select the proper speed.
[19200]
[38400]
[38400]
7)
Press as to select [PARITY].
8)
Press qw to switch [PARITY].
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]