Panasonic PT-RZ370U User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 79
[STATUS]
Displays the status of the projector.
1)
Press as to select [STATUS].
2)
Press the <ENTER> button.
f
The
[STATUS] screen is displayed.
3)
Press qw to switch the pages.
f
The page will change each time you press the button.
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[PROJECTOR RUNTIME]
Displays the operation times of the projector.
[INTAKE AIR TEMP.]
Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.]
Displays the status of the internal temperature of the projector.
[NUMBER OF ENTRY
SIGNAL]
Displays the number of registered signals.
[EMULATE]
Displays the [EMULATE] settings.
[PROJECTOR TYPE]
Displays the type of the projector.
[SERIAL NUMBER]
Displays the serial number of the projector.
[MAIN VERSION]
Displays the main version of the firmware of the projector.
[SUB VERSION]
Displays the sub version of the firmware of the projector.
[NETWORK VERSION]
Displays the network version of the projector.
Note
f
The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the status.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector.
Setting time zone
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f
The
[DATE AND TIME] screen is displayed.
3)
Press as to select [TIME ZONE].
4)
Press qw to switch [TIME ZONE].
Setting the date and time manually
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f
The
[DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f
The
[ADJUST CLOCK] screen is displayed.
5)
Press as to select an item, and press qw to set the local date and time.
6)
Press as to select [APPLY], and press the <ENTER> button.
f
The setting of the time will be completed.