Siemens C79000 Z7076 C638 04 User Manual

6-12

SIMATIC Box PC 620   Operating Manual

C79000-Z7076-C638-04

In order to create an extended partition, you have to first boot from the Windows
98 CD as described in steps 1 to 4 above.

Using ”A:\>FDisk” start the Recovery CD hard disk configuration program.

Select the dialog box for large disk support. “Do you wish to enable large disk
support (Y/N)...? [Y] for Yes.

Create an extended DOS partition for the rest of the disk space.

After installing a new hard disk it is necessary to create partitions  when the
partitions have errors or need to be changed.

By deleting or creating partitions or logical DOS-hard drives all saved data is lost
on the hard disk. All drives on the hard disk will be erased.

The hard disk is delivered with the following installed:

– a partition of with the FAT file system,

– a partition of with NTFS file system.

To restore the partition to its delivery state, proceed as follows:

1. Boot from the Recovery CD and press ESC when the BIOS message

Press <F2> to enter Setup

appears. After initialization, select the boot options in the boot menu.

2. Select ”ATAPI CD-ROM Drive”.

3. Select ”2. Boot for FDISK, FORMAT or Windows 98 Setup” in the ”Microsoft

Windows Startup Menu” screen form.

4. Start the Microsoft Windows hard disk configuration program with ”A:\>FDisk”. 

In the screen form select “Do you wish to enable large disk support (Y/N)...? 
[ Y ]” for Yes to support data media with large memory capacity.

5. Create a primary DOS partition with 4090 MB. Enter [N] for “No” for the ques-

tion ”Do you want to use the maximum memory size available for the primary
DOS partition and do you want to activate this partition?”  and set the partition
size to 6100 MB.

6. Set this partition as an active partition.