Xerox 6600/DN User Manual
Installation and Setup
32
Phaser 6600 Color Printer
User Guide
Connecting the Printer
This section includes:
•
•
Selecting a Connection Method ............................................................................................ 32
•
Connecting to a Computer Using USB ................................................................................. 32
•
Connecting to a Wired Network ............................................................................................ 33
•
Connecting to a Wireless Network ........................................................................................ 33
Selecting a Connection Method
The printer can be connected to your computer using a USB cable or an Ethernet cable. The method
you select depends on how your computer is connected to the network. A USB connection is a direct
connection and is the easiest to set up. An Ethernet connection is used for networking. If you are
using a network connection, it is important to understand how your computer is connected to the
network. For details, see
you select depends on how your computer is connected to the network. A USB connection is a direct
connection and is the easiest to set up. An Ethernet connection is used for networking. If you are
using a network connection, it is important to understand how your computer is connected to the
network. For details, see
About TCP/IP and IP Addresses
on page 43.
Note:
Hardware and cabling requirements vary for the different connection methods. Routers,
network hubs, network switches, modems, Ethernet cables, and USB cables are not included with
your printer and must be purchased separately.
• Network: If your computer is connected to an office network or home network, use an Ethernet
your printer and must be purchased separately.
• Network: If your computer is connected to an office network or home network, use an Ethernet
cable to connect the printer to the network. You cannot connect the printer directly to the
computer. It must be connected through a router or hub. An Ethernet network can be used for
one or more computers and supports many printers and systems simultaneously. Ethernet
connection is typically faster than USB and allows you direct access to the settings of the printer
using CentreWare Internet Services.
computer. It must be connected through a router or hub. An Ethernet network can be used for
one or more computers and supports many printers and systems simultaneously. Ethernet
connection is typically faster than USB and allows you direct access to the settings of the printer
using CentreWare Internet Services.
• Wireless Network: If your computer includes a wireless router or wireless access point, you
can connect the printer to the network with a wireless connection. A wireless network
connection provides the same access and services as a wired connection provides. A wireless
network connection is typically faster than USB and allows direct access to the setting of the
printer using CentreWare Internet Services. The optional wireless network adapter plugs in to
the back of the control board. After the adapter has been installed, and wireless networking has
been enabled and configured, the adapter can connect to a wireless network.
connection provides the same access and services as a wired connection provides. A wireless
network connection is typically faster than USB and allows direct access to the setting of the
printer using CentreWare Internet Services. The optional wireless network adapter plugs in to
the back of the control board. After the adapter has been installed, and wireless networking has
been enabled and configured, the adapter can connect to a wireless network.
• USB: If you connect the printer to one computer and do not have a network, use a USB
connection. A USB connection offers fast data speeds, but typically not as fast as an Ethernet
connection. In addition, a USB connection does not provide access to CentreWare Internet
Services.
connection. In addition, a USB connection does not provide access to CentreWare Internet
Services.
Connecting to a Computer Using USB
To use USB, you must have Windows XP SP1 and later, Windows Server 2003 and later, or
Macintosh OS X version 10.5 and later.
Macintosh OS X version 10.5 and later.