Xerox 6600/DN User Manual

Page of 190
Installation and Setup 
 
46 
Phaser 6600 Color Printer 
 
User Guide 
 
Finding the IP Address of the Printer Using the Control Panel 
To install the print drivers for a network-connected printer, you need the IP address of your printer. 
You also need the IP address to access the settings of your printer through CentreWare Internet 
Services. You can view the IP address of your printer on the Configuration Page or on the control 
panel. 
After the printer has been on for two minutes, print the Configuration Page. The TCP/IP address 
appears in the Network section of the page. If the IP address listed on the page is 0.0.0.0, the printer 
needs more time to acquire an IP address from the DHCP server. Wait two minutes, then print the 
Configuration Page again. 
To print the Configuration Page: 
1.  At the printer control panel, press the Menu button. 
Note: 
To navigate through the menu, use the Up or Down arrow buttons. 
2.  Navigate to Information Pages, then press OK
3.  Navigate to Configuration, then press OK
The IP address of the printer is listed in the Wired Network section of the page. 
To view the IP address of the printer on the control panel: 
1.  At the printer control panel, press the Menu button. 
Note: 
To navigate through the menu, use the Up or Down arrow buttons. 
2.  Navigate to Admin Settings, then press OK
3.  Navigate to Network Setup, then press OK
4.  Navigate to TCP/IP, then press OK
5.  Navigate to IPv4, then press OK
6.  Navigate to IP Address, then press OK
The IP address of the printer appears on the IP Address screen. 
 
Changing the IP Address Using CentreWare Internet Services 
To change the IP address of the printer using CentreWare Internet Services: 
1.  At your computer, open a Web browser, type the IP address of the printer in the address field, 
then press Enter or Return
 
Note: 
If you do not know the IP address of your printer, see 
Finding the IP Address of Your 
Printer
 on page 26. 
 
2.  Click the Properties link. 
If the Protocols link is not expanded under Properties, scroll to the Protocols link and expand it.