Xerox DocuPrint 180 User Manual

Page of 118
XEROX DOCUPRINT 180 LPS HARDWARE COMPONENTS
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
3-5
Printer hardware components
Figure 3-6 shows the components of the Xerox DocuPrint 180 LPS 
printer module.
Figure 3-6.
Xerox DocuPrint 180 LPS Printer
Processor feeder trays
Inverter-feeder/stacker module (containing inverter, high-
capacity feeder, and high-capacity stacker)
Feeder/stacker module (containing high-capacity feeder 
and high-capacity stacker)
4 Purge 
tray
Attention light
Sample tray
Printer control console
Note:
Configuration shown in Figure 3-6 does not depict the 
optional Bypass Transport or Input Enablement feature devices.
Processor feeder tray 1
Located in the main part of the printer, the capacity of feeder tray 1 is 
1,100 sheets of 20-pound/75-gsm paper. 
Processor feeder tray 2
The capacity of feeder tray 2 is 600 sheets of 20-pound/75-gsm 
paper.
Trays 1 and 2 can handle paper sized from 8- by 10-inch to 9- by 14-
inch/203- by 254-mm to 229- by 356-mm
High-capacity feeders (HCF)— trays 3,
4, 5, and 6
(5 and 6 optional)
Each HCF can hold up to 2,600 sheets of 20-pound/75-gsm paper as 
small as 7- by 10-inch and including large paper sizes, such as 
11.69- by 16.54-inch (A3), 11- by 17-inch (297- by 432-mm), and 
10.12- by 14-inch (B4).
High-capacity stackers (HCS) bins— A,
B, C, and D
(C and D optional)
Each HCS can hold up to 2,500 sheets of 20-pound/75-gsm paper, if 
a stacking container is not used.  Printed sets can be offset in the 
HCS for easier separation of reports.
Sample tray
The capacity of the sample tray is 100 sheets of 20-pound/75-gsm 
paper.