Xerox DocuPrint 96 Reference Guide

Page of 60
Guide to Performing Routine Maintenance
xiii
Introduction
This guide provides information on how to perform basic 
maintenance tasks on the Xerox DocuPrint 96, 4635, or 180.
NOTE:  You may be using the DocuPrint NPS/IPS software 
extension on a DocuPrint 2000 EPS system. The 2000 Series 
printer models are the 100, 135, 155, and 180. These printers 
are comparable in capabilities to the DocuPrint NPSIPS models 
96, 4635, and 180.
About this guide
This guide is designed for operators whose job consists of 
operating each of the system components, running print jobs, 
solving simple system problems, and performing basic 
maintenance tasks, such as replenishing dry ink. 
Refer to the entire list of documentation in the “Related 
publications” section for information on other tasks required for 
printing with your NPS/IPS printer.
Users should have an understanding of printer controller 
operations.
Before using this guide, become familiar with its contents and 
conventions.
Contents
This section lists the contents of this guide.
Chapter 1, “Feeder trays,” provides information on how to 
load feeder trays for your DocuPrint printer.
Chapter 2, “Output trays and bins,” describes how to unload 
output trays for the DocuPrint  printer.
Chapter 3, “Fuser lubricant,” describes how to refill the fuser 
agent reservoir, and how to replace the pressure roll wiper.