Nortel Networks 400 4.0 User Manual
168
Chapter 11 Installing the analog terminal adapter
N0060612
N0060612
Figure 80 Analog telephone installation overview
Analog data device
The ATA2 connects a standard analog data device, such as a fax or modem, to the BCM system.
shows an installation overview for connecting a data communication device through an
ATA2 to the BCM system.
Figure 81 Data communication device installation overview
Installing the ATA2
This section provides information on installing the ATA2:
•
•
•
Connecting the ATA2
After the correct environment has been set up, connect the BCM system and the analog device to
the ATA2 and then connect the power (see
the ATA2 and then connect the power (see
).
Analog telephone
ATA 2
BCM main unit
Line loop resistance:
135 ohms maximum
135 ohms maximum
Terminal loop resistance:
1300 ohms maximum
1300 ohms maximum
Central
Office
Office
ATA 2 power cord
Data communication
device
device
ATA 2
BCM main unit
Line loop resistance:
135 ohms maximum
135 ohms maximum
Terminal loop resistance:
200 ohms maximum
200 ohms maximum
Central
Office
Office
ATA 2 power cord