ZyXEL Communications VSG-1200 User Manual

VSG-1200 User’s Guide

Chapter 28 Configuration and Firmware Maintenance

219

Follow the steps below to configure the TFTP settings in the SMT. You must still have a 
WAN/LAN connection between the VSG and the TFTP server computer at the same time.

1 Connect the computer directly to the VSG through the console port. Refer to the section 

on establishing a console port connection for more information.

2 In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen.

Figure 155   SMT: Utilities Main Menu  

3  Type 1 and press [ENTER] to display the Firmware Upgrade screen.

4 Enter the IP address of the computer running the TFTP server in the TFTP Server IP 

Address field.

5 Specify the name of the firmware file in the Download Filename field.

Synchronization 

Check File

A Synchronization Check file is a file containing the latest firmware filename and 

version number on the TFTP server. Click View Sample File to display an 

example.
Enter the name of the check file.

Frequency

Set how often (Weekly, Daily or Hourly) you want to have the VSG check for new 

firmware and upgrade to new firmware if available (default Weekly).
Then select the day (applies only when you select Weekly), the hour (applies when 

you select Daily or Hourly) and the minute that you want the VSG to do the check 

and upload.

Apply

Click Apply to save the changes.

Table 74   Firmware Upgrade: Scheduled  (continued)

Note: You must run a TFTP server on a computer where a firmware file is 
stored to perform file upload.

                       Utilities Menu

                        1)Firmware Upgrade
                        2)Change Password
                        3)Return to Main Menu

                           Enter selection:

Enter a numeric between 1 and 3.