Sony PCNA-MR10 Manual
RoomLink User Guide
66
4
Press the up or down arrow buttons to highlight IP Address, then press the
SELECT button.
SELECT button.
The IP Address screen appears.
5
Press the up or down arrow buttons to highlight Specify IP Address, then
press the SELECT button.
press the SELECT button.
6
Use
to highlight the IP Address numbers, then press the SELECT
button.
7
Use the channel number buttons or the up/down arrow buttons to enter
numbers for the IP address and the subnet mask, then press the SELECT
button.
numbers for the IP address and the subnet mask, then press the SELECT
button.
8
Use direction arrow buttons to highlight OK, then press the SELECT
button.
button.
9
Turn the RoomLink™ unit off, then restart it, to enable the changes to take
effect.
effect.
IP Address screen
✍
If you are not using a router device, select “Obtain the IP address automatically.” An IP
address and subnet mask is generated automatically.
address and subnet mask is generated automatically.
Settings
IP Address
Current Settings:
OK
Obtain an IP address automatically (using router)
Obtain an IP address automatically (not using router)
IP Address:
Subnet Mask:
000
000
.
.
000
000
.
.
000
000
.
.
000
000
Specify an IP address
SELECT
:Select
RETURN
:Return
CANCEL
/
/
/