Sierra Wireless DART 300 User Manual

References 

 

DART 300 Modem 

 

Page 112 

 

2110212 Rev 1.0 

Registration Mode 

When set to manual, the modem will wait for a command 
before finding a channel and registering.  If set to automatic, 
the modem will automatically register the NEI indicated by 
+WS176 (Auto-register NEI Index). 

Changing from automatic to manual will immediately de-
register any currently registered NEI.  Changing to automatic 
will initiate registration if there is not a currently registered 
NEI. 

Value Meaning 

0 – Manual 
1 – Automatic 

Note that automatic registration does not return a result code.  
Failures to register are not reported and the modem retries 
indefinitely.  The registration status is available at any time by 
reading register +WS201 (Registration Result Code). 

NOTE:  It is possible to have this register report a value of 1 
when the modem is not attempting to register.  If the Hook 
Control option H1 is issued, the auto-registration process is 
halted regardless of the setting reported in this register.  The 
process will resume when the modem is reset or this register is 
re-written with the enabling value (1). 

0, 1 

1* 
*As 
shipped.  
Last value 
used 
becomes 
the default. 

 

Channel Side A/B Preference 

Value Meaning 
1 

A Side preferred  (Default) 

2 

B Side preferred 

3 

A Side only 

4 

B Side only 

1 – 4 

1* 
*As 
shipped.  
Last value 
used 
becomes 
the default. 

 

CDPD Sleep Idle Time 

Specifies the idle time before entering sleep state.  Sleep state 
reduces power consumption and is described in Section 5.4.  
See Section 14.1 for figures on power consumption. 

Value  

Meaning 

0 

 

Disabled  (Disabled) 

10 – 3600 

Idle time to sleep mode in seconds. 

See also register S31 (Logic Sleep). 

0,  
10 – 3600 

0 seconds